AGA CONVERSION INFORMATION

How the Aga Conversion Kit Works

Aga conversion

Before the Aga Conversion

Before we arrive onsite to convert you cooker, you will need to have the original fuel supply disconnected and have 2 x 13amp fused switches installed to receive the kits wiring. 1 to supply the hotplates and 1 to supply the ovens.

If you need help in making those preparations let us know when booking and we will see what we can do for you.

The rest is easy, we just need access to your kitchen or the room where your AGA cooker is located for the day, we usually arrive between 8-9am depending on your location and have the cooker turned on and warming up before the sun sets the very same day. What to expect when you have experienced experts at work in your home.

Aga conversion

Aga During Rebuild

When we convert your cooker, we reduce the mass of internals to be heated therefore the energy used to heat your ovens and the heating time. Making the cooker more responsive to the command for heat. There are several benefits such as overall running cost, controlling the heat that is dissipated from the cooker (massively beneficial in summer months when the heat given off a non converted aga is excessive)

When we convert your cooker, we reduce the mass of internals to be heated therefore the energy used to heat your ovens and the heating time. Making the cooker more responsive to the command for heat. There are several benefits such as overall running cost, controlling the heat that is dissipated from the cooker (massively beneficial in summer months when the heat given off a non converted aga is excessive)

Coupling the insulation with WiFi timer control you really will have a fully controllable efficient cooker.

Aga conversion in Wiltshire

Aga On Completion

On completion of the rebuild/conversion that we complete in one day onsite. We will connect and test the cooker. Getting it up to heat before we leave.

You will have a control panel behind the door where your gas or oil burner lived. Including, 2 independant control knobs for your hotplates. They can now both be simmer plates, boiling plates or both off, you decide.

A simple on off switch for your ovens with roasting oven temperature display. 2 arrows to adjust that temperature. The lower baking oven always sits roughly 60 degrees below the roasting ovens set temperature.

If you have a smart WiFi controller fitted, when controlling the on/off function of the ovens there is a memory chip fitted so whatever temp you turn off the cooker it will remember when you turn it back on!

Warranty Information

Your warranty begins when work onsite has been completed and signed off on the day of your visit.

Electric Aga Conversions:

2 years parts and labour cover on the complete kit.

Aga Enamelling Services:

Quality of the enamelled parts we fit is paramount to us, we check all the parts before we fit anything. During the preparation process we use a tried and tested quality control checklist.

If once fitted you find any issue with your enamel we will make note onsite and return to rectify them as soon as possible.